当前位置:变形缝首页 > 变形缝配件 > 橡胶止水带
变形缝配件
橡胶止水带
  • 产品型号:

  • 产品类型: 变形缝配件

  • 产品材质: 三元乙丙橡胶止水带

  • 常规长度:

  • 表面处理:

  • 材质厚度: 1.2

  • 参考图集:

  • 发布时间: 2020-10-13

  • 三元乙丙橡胶止水带

    抗拉强度高,韧性高,弹性强,止水效果好,抗老化性能好,可在阳光、潮湿、寒冷的环境下使用,适用范围-50-80,广泛应用于工业和民用建筑的止水工程中。

    变形缝止水带

    安装方法:将卷材放在干净的基层上,将刷子(401/404)挖到胶桶内,将胶水涂在卷材两侧,然后在基层上进行涂刷。等到胶水变干并且没有粘性。

    当长度方向需要接合时,使用匹配的胶水。长度:50mm-100mm


    -------------------------------------------------------------------------------------------------

    EPDM water stop

    It has high tensile strength, high toughness, strong elasticity, good sealing effect, good ageing resistance, and can be used in sunny, wet and cold environment. Its application scope is -50-80, and it is widely used in Waterworks of industrial and civil buildings.

    Installation method of deformation joint waterstop: put the coiled material on the clean base, dig the brush (401 / 404) into the rubber barrel, apply glue on both sides of the coiled material, and then brush on the base course. Wait until the glue is dry and not sticky. When the length direction needs to be joined, use the matching glue. Length: 50 mm-100 mm


    首页 |关于鸿越 |产品中心 |变形缝图集 |变形缝百科 |联系我们 |
    cache
    Processed in 0.009384 Second.