建筑变形缝装置中胶条应采用热塑性三元乙丙橡胶，胶条外观质量符合14J936图集表9的规定：

1、气泡、杂质不超过成品表面面积的0.5%且每处小于等于25平方毫米，深度小于等于2毫米。

2、喷霜，发脆，裂纹是不允许的。

3、明疤缺胶面积小于等于（30×5）平方毫米，深度小于等于2毫米，每处不超过4处

胶条尺寸应符合设计要求

-------------------------------------------------------------------------------------

Thermoplastic EPDM rubber shall be used in the construction deformation joint device, and the appearance quality of the rubber strip shall meet the requirements of Table 9 of 14j936 atlas

1. Bubbles and impurities shall not exceed 0.5% of the surface area of the finished product, and each part shall be less than or equal to 25 mm square, and the depth shall be less than or equal to 2 mm.

2. Frosting, embrittlement and cracks are not allowed.

3. There are no more than 4 spots in each part with the area less than or equal to (30 × 5) square mm and the depth less than or equal to 2 mm

The size of adhesive tape shall meet the design requirements